CCENT ICND1 Practice Test 3 CCENT ICND1 Practice Test 3 __________________________ is used to rate the trustworthiness of a route received on a router from some neighbor router. a) Advertised Distance b) Trustworthy Distance c) Feasible Distance d) Administrative Distance Which protocols support VLSM? Choose 3 a) EIGRP b) OSPF c) IGRP d) RIPv2 OSPF uses 3 types of tables, which are __________, ____________, and ________. a) Neighbor Table b) Topology Table c) Routing Table d) IP table Convert the IP address to binary format 192.168.20.25 a) 11000000. 10101010. 00010100. 00011001 b) 11000000. 10101001. 00010100. 00011001 c) 11000000.10101000.00010100.00011001 d) 11000001. 10101000. 00010100. 00011101 If a device is assigned the IP address 9.80.86.211 /27 on an interface, the valid subnet address for the interface will be ____________ a) 9.80.86.192 b) 9.80.86.223 c) 9.80.86.224 d) 9.80.86.128 Which of the below is not a Layer2 switch function? a) Address learning b) Routing packets c) Forward and filter decisions d) Loop avoidance What is the valid range of IP address for a given IP address: 35.41.230.30 /10 ? a) 35.64.0.1 – 35.127.255.254 b) 35.128.0.1 – 35.191.255.254 c) 35.0.0.1 – 35.63.255.254 d) 35.130.0.1 -35.192.250.254 Which of these routing methods have less overhead on the CPU and consumes less or no bandwidth between routers? a) Default Routing b) Dynamic Routing c) Static Routing d) Packet Routing Frames that do not meet the minimum frame size requirement of 64 bytes are called ___________ a) Minor frame b) Small frame c) Runts d) Giants To make a switch port allow only one host per port and shutdown the port if rule is violated, which will be the correct configuration? a) Switch_A(config-if)#switchport port-security allow 1 Switch_A(config-if)#switchport port-security violation shutdown b) Switch_A(config-if)#switchport port-security maximum 1 Switch_A(config-if)#switchport port-security violation shutdown c) Switch_A(config-if)#switchport port-security permit 1 Switch_A(config-if)#switchport port-security violation shutdown d) Switch_A(config-if)#switchport port-security maximum 1 Switch_A(config-if)#switchport port-security shutdown violation Loading … Question 1 of 10 More Tests CCNA Practice Test CCENT Practice Test CCNP Practice Test
